Rack Mount Lane Controller

Rack Mount Lane Controller

The Tolltex rackmount lane controller specifically addresses the needs of the toll industry. The unit is designed for mounting in equipment racks located in recorder rooms or under toll booth counters. A ruggedized Pentium CPU, digital I/O support, a 16 channel serial communication panel, slide out access to solid state relays, TCP/IP network support, hard disk or flash disk storage, and the QNX real time operating system provide a solid platform to support ETC, coin machines, or manual toll collection.

In the above photo, the right unit is the front view, the middle unit shows internal layout and slide out relay drawer, the left unit shows the back with serial panel, and board edge connections.

Features

Processor: Intel Pentium 400 MHz or greater.

Permanent Storage: Internal 6GB disk standard, larger disks and flash disks are also supported.

Offline Storage: Laptop PC connection allows data to be transferred from the controller if the network is down.

Memory: 16MB RAM standard, 60ns speed. Additional memory supported.

Language: All programs are written in "C".

Communications: TCP/IP Ethernet standard. 10BaseT or 100BaseT with fiber optic links.

Operating System: Real-Time POSIX certified QNX.

Power: 120/240 VAC 250 Watt Power Supply.

Temperature: 0 to +55^o C.

Dimensions: 19" W x 8.5" H x 20" D.

Serial Communications: Comtrol Rocketport board with 16 channel I/O panel. RS-232 or RS-422.

Chassis: 1 CPU slot, 5 ISA slots, 2 PCI slots. Other configurations are available.

Digital I/O: 48 channel board with opto relays.

Field I/O: 16 or 24 channel rack to support plug-in opto relays. Slide out drawer allows easy access to relays.

Enclosure: Steel, 16 gauge with 14 gauge front panel, powder paint finish.

Other Features: Key switch for lane open/close, maintenance switch, status indicators for canopy light, ON/OFF circuit breakers.

Get a cutsheet version of this page by downloading racklcl.pdf (62K).
You will need Adobe Reader to view the file.